Filter By:
- Lubes/Cleaners (258)
- Tools (1420)
- Workstands (72)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool.
- Weight: 38.5g
- Size: 116 mm x 20 mm x 9 mm
- Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains
- Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
White Lightning's Crystal Grease is so pure and innovative, it's clear. Premium base oils allow this 100% waterproof grease to provide smooth, long-lasting lubrication and the clear color won't stain or hide damage and contaminants. And, you'll feel good knowing that it's biodegradable, non-toxic, and won't harm carbon, seals and other crucial components.
$40.00
- Professional tools to correctly size spokes for wheelbuilding
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually
$8.53 - $147.15
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
Designed for bikes with hollow spindle cranksets. Lift the rear wheel to mount bike on the tune-up stand in seconds for washing, display, storage and maintenance.
- CLAMP HEAD: hollow spindle drive side crank
- ADD FEATURE: Quick tool-free assembly
- MATERIAL: Aluminum / Engineering grade polymer / Steel
- MAX WEIGHT CAPACITY: 18 kg / 39.7 lb
- COMPATIBILITY: Bike with hollow spindle cranksets (more than 20 mm)
- SIZE (folded): 40 x 40 x 8 cm / 15.7” x 15.7” x 3.1”
- SIZE (open): 40.5 x 39.5 x 38 cm / 15.9” x 15.6” x 15”
- 1.8 kg / 3.97 lb
An easily accessible hidden compact chain tool kit housed in handlebar ends for your mountain bike. Features CrMo steel chain tool for single and multi-speed chains up to 13 speed, including SRAM Flattop chains and Campagnolo hollow pin chains. Included chain hook holds links during assembly.
- Chain tool requires 4mm bit, or wrench to operate
- Material: hardened steel / engineering grade polymer
- Limitations: handlebar ends with minimum 105mm straight section ID range ø17 - ø21 mm
- Weight: 52 g / 1.83 oz
$18.95
- Two sturdy tire levers also work as a chain master link tool to remove and install chains
- Includes a chain hook to make installation and removal easy
- Features a valve core tool as well as a place to store a spare quick link
$119.95
- A compact roll-up, multi-function ratchet tool set with tubeless tire repair, CO2 inflation kit, and chain tool. Pretty much everything you need to fix and make precise adjustments to your bike while out and about
- Features knurled bits to allow for ease of insertion
- Includes: 2, 2.5, 3, 4, 5, and 6mm, hex bits T10, T15, and T25 Torx bits a #2 Phillips bit, a chain tool, CO2 inflator/plug kit and a ratchet driver with reverse lever and thumb wheel made from hardened steel
- Includes two silicone straps and roll-up holder
$9.95
Topeak's Shuttle Levers are strong enough for even the busiest shops; think what they'll do for that tight road tire and fat downhill rubber. These levers are extra long for leverage and are made of engineering-grade plastic with stainless-steel reinforcements down the middle that ensures years of hard use.
- Pocket sized chain tool that mates perfectly with Topeak ratchets and torque tools
- Compatible with single and multispeed chains up to 12 speed including Capagnolo chains
- Includes a 4/5mm allen key and a chain hook as well as a rubber clip to hold
$139.00
Torq Stick Torque Wrech
- Pull & rotate to select your target torque value
- Audible signal: Torque wrench clicks when preset torque is reached
- Storage pen integrated with tool holder snaps to hold the Ratchet Stick together for riding or storage
- Turn the ratchet wheel to tighten or loosen mounting bolt
- 3, 4, 5 Allen bits, T20, T25 Torx bits included
- Material: aluminum and engineering grade polymer body, hardened steel ratchet, S2 hardened steel bits
- A torque wrench with adjustable range from 4-20Nm
- Reversible ratcheting head
- Bits are knurled to make insertion and removal easier
- Includes the following hex bits 3 4 5 6 8 10 and T20 T25 and T30 Torx bits
- Pro model also available which incl
$14.95
Precision CNC machined aluminum Tubi Valve Cleaner allows to remove or tighten two-piece Presta valve core and clear tire sealant clogs from valve stem for tubeless tire maintenance. Compact size easily fits in a jersey pocket or saddle bag.
- No more fighting with clogged valves with this handy tool in your arsenal
- Features a stainless steel knurled probe rod to clean the funk out of your valves and a Presta valve core tool
- CNC aluminum housing holds the tool when not in use
Serfas has the basics covered with the Combo Kit. It comes with their Micro Blast CO2 inflator, 2 16-gram threaded cartridges, a 6-piece mini-tool, and a set of tire levers, as well as a seat bag to carry it all.
Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.
$25.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.
$6.50 - $18.50
Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt.
- For road bikes only
$8.50 - $17.90
- Premium white grease
- Great for bearings and overhauls
$22.95
The smartest, most convenient torque key now comes with enough bits to suit every need. Make sure those stem bolts are tight enough, and double check the torque on the seatpost bolt while you're at it. The Ritchey Bicycle Torque Key is an essential tool for those important bolts. Available with 4 or 5Nm options, this 6-bit set includes just about every bit you'll need for your bike, and a convenient holder to keep it all organized.
- Hex 3/4/5mm
- Torx T-20/25
- Phillips #1
- 4 or 5Nm max torque
- Bit holder included
$5.90 - $15.90
- Exceptional friction reduction and anti-wear properties with greatly reduced friction in metal to metal applications
$8.99 - $47.20
ProGold ProLink is designed to shed dirt, mud, and abrasives, and reduce tacky build-up in all climates.
- Smoother shifting, quieter drive train
- Repels moisture and reduces oxidation and corrosion
- Disperses water and resists wash-off
- Will not build up or get tacky
- Works well in all climates
- Longer chain and sprocket life
- Long-lasting
- Can be used as a dry lubricant
- Environmentally friendly
- Available in: 4 fluid-ounce drip, 8 fluid-ounce aerosol, 16 fluid-ounce pump, and 32 fluid-ounce.
$7.88
ProGold Prolink Cable Luber .25oz
ProLink lubricant in a convenient, refillable applicator.
- Lube and clean cables - on the bike - in minutes
- Restores old or corroded cables
- Year-round protection against rust and corrosion
- Compact and easy to use
- No product waste
- Non-staining
$11.55
Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. The final blending of rust inhibitors and extreme wear additives happens at our facility before the product is bottled and shipped.
- Ultimate protection and durability for metal-metal contact
- Base oil with rust inhibitors and anti-wear additives
$15.00
- Updated shape features smaller head profile for clearance and longer handle for control.
- Superior material and heat treatment outlast the competition.
- Precision laser cut design with ergonomic cushioned grip.
Pedro's cone wrenches are made from 2mm thick, precision laser cut, heat-treated tool steel and are revered for outlasting many other "shop quality" cones wrenches. Pedro's designed each cone wrench to fit perfectly, protecting the hub and ensuring simple and safe usage for the mechanic. Each flat wrench also features a single-ended design with ergonomic cushioned grip to provide maximum leverage & comfort. The updated shape features a smaller head profile for better clearance and a longer handle for improved leverage and control. Backed by Pedro's lifetime warranty.
$25.99
The T-Handle Bit Drive is a versatile, lightweight, 1/4" hex bit drive tool with in-handle bit storage. Designed for use with our Multi-Torque torque indicating bit drive, the T Handle Bit Drive is also a fantastic stand-alone multitool platform. Store up to four standard 1/4" hex bits inside the handle plus one in the magnetic bit drive, or add the compatible Multi-Torque Bit Set to store eight additional bits on board.
- 80 gram, 5-function, sliding t-handle, bit-based multitool with 1/4" magnetic drive, and in-handle bit storage.
- Compatible with Multi-Torque Bit Set.
- Includes 3, 4, 5, 6mm hex and T25 torx bits.
$11.00 - $12.00
Y-Style Hex Wrench
Ergonomic Y-style handle design. Designed to stand up to the harsh conditions of professional use.
- Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body for strength and lasting performance.
- The ergonomic shape provides excellent leverage and easy handling.
- Perfect for common hex hardware found on modern bicycles and components.
- Backed by Pedro's lifetime warranty.
$14.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide.
AWS-1 FEATURES
- 4mm, 5mm, and 6mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
$12.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide.
AWS-3 FEATURES
- 2mm, 2.5mm, and 3mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
Page 1 of 59
Next page